Follow these easy steps to get your Zanussi ZKG 7165 Dryer up and running in no time.

1. Ensure Electrical and Water Connections

Ensure that the electrical and water connections comply with the installation instructions.

2. Remove Packaging Material

Remove the polystyrene block and any material from the drum.

3. Run Initial Wash Cycle

Before the first wash, run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub.

4. Remove Transit Bolts

Remove all transit bolts and packing before using the appliance. Keep all transit devices for future use if the machine needs to be transported.

5. Lay Machine on Back

After removing all packaging, carefully lay the machine on its back to remove the polystyrene base from the bottom.

6. Connect Power Supply and Hose

Remove the power supply cable and the hose from the hose holders on the rear of the appliance.

7. Open Water Tap and Position Drain Hose

Ensure the water tap is open and the drain hose is positioned in the sink or connected to the drain pipe.

Back to Home

Zanussi ZKG 7165

;